Concrete is often considered an outdoor material suitable for driveways or garage work surfaces.
Can you clean floor that are sealed.
Since they are unsealed i d use a non water based wax to finish the floor once it has been cleaned.
2 their shine lasts longer.
You can also use soaps specifically made for polyurethane hardwood floors.
Place few drops of water at a hidden area of your floor and watch.
The best soaps for polyurethane floors are mild ph neutral ones.
If you use the water and vinegar mixture make sure you dry the floor as you go.
Take some fine steel wool and rub a small hidden area of your floor.
You don t want water to sit on the floor too long.
It protects the floor against damage stains and moisture.
Sealing the wood protects the floor from moisture which is the floor s worst enemy.
Sealed concrete however can be decorative and is a good low maintenance alternative for indoor flooring.
No matter what type of sealer or finish your hardwood has the basic cleaning rules are the same.
Mix up a solution of soap and water.
Cleaning is always more effective on a floor that is sealed.
You would need to clarify what the floors are sealed with in order to decide what product or method to use.
Gentle cleaners are best for any hardwood floor finish but oiled and waxed floors require a type of care you don t need to lavish on hard surface finishes.
If it get absorbed then the floor is not sealed or the seal is damaged.
Make sure to use a broom with soft bristles to sweep.
Acrylic urethane epoxy and silicate.
For instance you can simply use a capful of dishwashing soap or murphy oil soap in a bucket of water.
If it bead up seats there it implies that the surface is sealed properly finished.
Because sealed concrete is non porous it resists most stains and is therefore exceptionally easy to clean and maintain.
Unsealed hardwood especially ones with either wide or narrow gaps between the planks are prone to dust and dirt accumulation thus sweeping or vacuuming it makes good sense.
The shine of sealed hardwood flooring remains and only needs regular sweeping and mopping.
You can seal concrete using one of the following sealants.
Above all avoid excess moisture when cleaning and always wipe up liquid spills and pooled water immediately.
However it is a good general rule not to use water on any wood floor product sealed.
For natural less abrasive cleaning methods you may use lemon dips tea tree oil or olive oil.
Use a simple test to determine what finish is on your floor.
There s no need wet mop or steam clean a wood floor and both of these methods can damage the wood.
Sealed floors only require you to wipe up spills on them immediately so that no stains are left behind.